Therm-App MD Pro

ThermApp MD is a vital tool for fever detection in high-risk areas.

People exhibiting elevated skin temperatures, which may indicate a fever, could then be isolated for further evaluation to determine the cause.

Therm-App MD Pro Features

Unlimited Hotspot
Detection & Tracking

Scans multiple faces at once, with no distraction by other heat sources and no crowd interference.

Advanced Deep Learning Algorithm

Real-time base temperature auto-adjustment to compensate for localized climate change

Linux-Based Solution

Includes a Smart Edge Device. SDK provided upon request.

Up to 20 Simultaneous Scans

With an advanced facial detection algorithm.

Stand-Alone Solution

No additional calibration equipment is required.

Remote Sensor

No crowd flow interference

Quick Hotspot Detection

Under 0.5 seconds from detection to analysis

Audio & Visual Alert

Blinking suspect image & alarm.

General Camera Information


Therm-App MD Pro Mobile Thermal Imaging Device for Elevated Body Temperature Measurement

In 2003, OPGAL was first in the market to employ thermal imaging cameras to measure airline passengers’ skin temperature passing through SARS-affected regions. An elevated skin temperature may indicate fever allowing affected people to be isolated for further evaluation to determine the cause.


Camera Specifications
Resolution 384 x 288 pixels
Accuracy +/-0.3°c @ target temperature ranges of 25-45°c (* Measured in controlled conditions at 25°c)
Sensitivity NETD less than 0.07°c
Measuring Temperature Range 25-45°c
NUC Calibration Shutterless (no On Site calibration is needed)
Measurement Tools Advanced Deep Learning Algorithm
Imager (Detector) 384 x 288 microbolometer LWIR 7.5 -14μm
Zoom Digital Zoom
Feature updates Via the Website (simple periodic updates)
Power Supply & Consumption No battery, 5V DC over USB cable, <0.5W
Optics 6.8mm lens (55° x 41°)
Focus Manual, 0.2m to infinity
Frame Rate 8.7Hz
Weight 123 grams / 4.33 ounces
Size 55 x 65 x 40mm (2.16 x 2.55 x 1.57in)
Operating Temperature 10°C to +45°C (14°F to +122°F)
Storage Temperature -20°C to +60°C (-4°F to +140°F)
Certifications & Encapsulation CE, FCC, IP54
Mount/Handle & Device Attachment Standard tripod mount, using 1/4″-20 Clip-on for smartphones (5-10cm span)
Package includes USB Cable, HDMI Cable, Ethernet Cable, Computer, 100- 240VAC Power Supply, Power Cable, and Mini Tripod
CPU Six Core ARM® Carmel® V8.2 Processor
System Memory 8GB LPDDR4
AI Solution Nvidia Jetson Xavier NX
Display Interface HDMI 2.0
Storage Device 16GB eMMC | Micro SD Slot x1
Ethernet 10/100/1000 Base-TX x 1
I/O LAN x 1 | RS-232 x 1 | GPIO x2 | HDMI x 1 | MicroSD x 1 | DC Power Input x 1 | Recovery Button x 1 | Micro-USB for Flash OS x 1
USB USB 3.2 Gen 1 x 4
Software SDK + ThermApp MD Pro Application
Indicator Power LED x 1
OS Support Linux (compliance with Ubuntu 18.04)
Power Supply 12V DC w/ 2-pin terminal block
Power Consumption & Operating Temp 15W @ 6 cores 1.4Ghz
* Based on 100% CPU load, 100% GPU load, no throttling, and airflow of 0.5 m/sec.
Mounting Wall Mount
Dimensions (W x D x H) 88mm x 75mm x 39mm | 3.46” x 2.95” x 1.53”
Net Weight 0.3 kg | 0.66 lbs
Operating Temperature -20°C ~ 40°C | 20°F ~ 104°F
* Based on 100% CPU load, 100% GPU load, no throttling, and airflow of 0.5 m/sec.
Storage Temperature -40°c ~ 70°c | (-40°F ~158°F)
Storage Humidity 95% @ 40°C, non-condensing
Anti-Vibration 3 Grms/ 5 ~ 500Hz/ operation – MicroSD or eMMC
Certification CE/FCC class A

Contact Us

Simply enter your details and we'll get back to you shortly to help you explore the range of GravityTech Products and Solutions